Duplex Steel & Alloys is a leading supplier of Hastelloy
C276 Fasteners in India. We offer top quality fasteners
at the most reasonable rates in the market.
Excellent corrosion resistance is displayed by Hastelloy
C276 Fasteners in a number of challenging environments and media. Hastelloy
C276 Fastener is ductile, readily made, and weldable, like many other nickel
alloys. Most industrial locations where there are hostile chemical
conditions present and other alloys have failed employ Hastelloy C276
Fasteners. Whether permanently or temporarily, Hastelloy C276 Fasteners are
used to mechanically connect two or more things. There are numerous
varieties of Hastelloy C276 Fasteners, each with a distinct function.
Hastelloy C276 Fasteners are one the most widely used corrosion-resistant
fasteners on the market today.
Hastelloy C276 Fasteners, Hastelloy C276 Bolts, Hastelloy C276 Nut Bolt,
Alloy 22 Fasteners, Hastelloy Alloy C276 Fasteners, Hastelloy C276 Fastener
Suppliers in Mumbai, India.
Hastelloy C276 Washers, Alloy C276 Screw, Alloy C276 Bolts, Hastelloy C276 Nuts,
Hastelloy Alloy C276 Hex Bolt, Hastelloy C276 Stud Price, Hastelloy C276 Fasteners
Manufacturers in India.
Hastelloy C276 Fasteners can be employed in a range of
situations, from strongly reducing to moderately oxidising ones. Sulfuric acid,
hydrochloric acid, formic acid, acetic acid, chlorides, solvents, moist chloride gas,
hypochlorite, and chlorine solutions are all extremely resistant to Hastelloy C276
Fasteners. Phosphoric acid is very resistant to Hastelloy C276 Fasteners at all
temperatures below boiling and concentrations below 65%. Low chromium content is the
limiting element when dealing with strong oxidising conditions, hence hot concentrated
nitric acid settings are undesirable. Hastelloy C276 Fasteners provide exceptional
resistance to oxidising environments, stress corrosion cracking, and pitting.
Additionally, Hastelloy C276 Fasteners demonstrate resistance to vigorous assault from
seawater corrosion in crevice circumstances, which can cause corrosion in other
frequently used materials.
The manufacture of pulp and paper, oil and gas, electricity
generation, pharmaceutical, chemical and petrochemical processing, and waste water
treatment are just a few of the industries that often use Hastelloy C276 Fasteners.
Stack liners, ducts, dampers, scrubbers, stack gas reheaters, heat exchangers, reaction
vessels, evaporators, transfer pipework, and several more extremely corrosive
applications are examples of end use applications.
Hastelloy C276 Bolts and Nuts Specification
| Standard |
ASTM B574 / ASME SB574 |
| Bolt / Screw Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Nuts Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Machine Screws Size |
M1.6 – M12 |
| Self Tapping Screw Size |
No.2 – No. 14 |
| Length |
3 mm to 200 mm |
| Threads |
UNF, BSW, BSF, METRIC, UNC, or as required |
| Fasteners |
- DIN : DIN 934, DIN 931, DIN 970, DIN 933
- UTS : UNEF, NPT, UNC, UNS, UNF, NPTF
- ISO : JIS standards, ISO 4033, ISO 4032,
- ANSI – American National Standards Institute
- ASME B18.5
- ANSI B 28.2.4 1M
- as per defined in ASME B16.5 standard length
- ANSI B 18.2.4 2M
- as per defined in ASME B18.2.2
|
| Form |
Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source |
JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Threads Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric
Coarse Threads |
| Certification |
Dual Certified As per ASTM & ASME Codes |
| Dimensions |
DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads |
Unless otherwise specified, the threads shall be rolled or cut and
tapped horizontally or vertically |
| Test Certificate |
as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications |
PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production Process |
M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting
element machining and CNC |
Types Of Hastelloy C276 Fasteners
Hastelloy C276 Bolts
Alloy C276 Nuts
Hastelloy C276 Screw
Nickel Alloy C276 Washer
Alloy C276 Stud Bolts
Hastelloy C276 Anchor Bolt
Hastelloy C276 Threaded Rod
ASTM B574 Hastelloy C276 Hexagonal Bolt
Hastelloy C276 Hex Nut
Hastelloy C276 Fastener Equivalent Material
| STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
GOST |
EN |
OR |
| Hastelloy C276 |
2.4819 |
N10276 |
NW 0276 |
ХН65МВУ |
NiMo16Cr15W |
ЭП760 |
Hastelloy C276 Fastener Chemical Properties
| Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
| Hastelloy C276 |
0.10 max |
0.50 max |
0.50 max |
0.015max |
- |
5.0 max |
58.0 min |
20.0 - 23.0 |
Mechanical Properties of Hastelloy C276 Fasteners
| Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| Hastelloy C276 |
8.4 g/cm3 |
1350 °C (2460 °F) |
Psi – 1,35,000 , MPa – 930 |
Psi – 75,000 , MPa – 517 |
42.5 % |
ASTM B574 Hastelloy C276 Fasteners, Nickel Alloy C276 Fastener, Hastelloy C276 Anchor
Fasteners, Hastelloy C276 Hex Bolt Price List, Alloy C276 Nut Bolt Manufacturer,
Hastelloy C276 Fasteners Suppliers in Mumbai.
If you are looking for best prices for Hastelloy C276 Fasteners, Alloy C276 Stud
Bolt, Alloy C276 Fasteners email us on info@duplexsteelalloys.com
or call us on +91 9664408767
Hastelloy C276 Fasteners Price List
| Product |
Price |
| Hastelloy C276 Nut Bolt Price Per Kg |
US $1.99-200 / Kg |
| ASTM B574 Hastelloy C276 Hexagon Head Screw |
US $1290-4900 / Ton |
| Cost Per Kg of Alloy C276 Heavy Hex Nuts |
US $99-1100 / Kg |
| Hastelloy C276 Washer Price |
S $1.00-900.0 / Kg |
| Hastelloy C276 Self Locking Nuts Price Per Kg |
US $190-1990 / Ton |
| Alloy C276 Heavy Hex Bolt price |
US $1000-4500 / Ton |
| Hastelloy C276 Anchor Fasteners Price List |
US $1500-2C276 / Ton |
| Hastelloy C276 Bolt Price List |
US $2200-4000 / Ton |
| Hastelloy C276 Socket Head Screw Price |
US $1.2-3.7 / Kilogram |
| Hastelloy C276 Allen Cap Screw Price |
US $1,100.00-2,100.00 / Ton |
Hastelloy C276 Bolt Thread Sizes
| Size |
Nominal (Major)
Diameter [in] |
Coarse Thread (UNC) |
Fine Thread (UNF) |
Threads
Per Inch |
Tensile Stress
Area [in2] |
Minor
Area [in2] |
Threads
Per Inch |
Tensile Stress
Area [in2] |
Minor
Area [in2] |
| #0 |
0.0600 |
--- |
--- |
--- |
80 |
0.00180 |
0.00151 |
| #2 |
0.0860 |
56 |
0.00370 |
0.00310 |
64 |
0.00394 |
0.00339 |
| #4 |
0.1120 |
40 |
0.00604 |
0.00496 |
48 |
0.00661 |
0.00566 |
| #5 |
0.1250 |
40 |
0.00796 |
0.00672 |
44 |
0.00830 |
0.00716 |
| #6 |
0.1380 |
32 |
0.00909 |
0.00745 |
40 |
0.01015 |
0.00874 |
| #8 |
0.1640 |
32 |
0.0140 |
0.01196 |
36 |
0.01474 |
0.01285 |
| #10 |
0.1900 |
24 |
0.0175 |
0.01450 |
32 |
0.0200 |
0.0175 |
| 1/4" |
0.2500 |
20 |
0.0318 |
0.0269 |
28 |
0.0364 |
0.0326 |
| 5/16" |
0.3125 |
18 |
0.0524 |
0.0454 |
24 |
0.0580 |
0.0524 |
| 3/8" |
0.3750 |
16 |
0.0775 |
0.0678 |
24 |
0.0878 |
0.0809 |
| 7/16" |
0.4375 |
14 |
0.1063 |
0.0933 |
20 |
0.1187 |
0.1090 |
| 1/2" |
0.5000 |
13 |
0.1419 |
0.1257 |
20 |
0.1599 |
0.1486 |
| 9/16" |
0.5625 |
12 |
0.182 |
0.162 |
18 |
0.203 |
0.189 |
| 5/8" |
0.6250 |
11 |
0.226 |
0.202 |
18 |
0.256 |
0.240 |
| 3/4" |
0.7500 |
10 |
0.334 |
0.302 |
16 |
0.373 |
0.351 |
| 7/8" |
0.8750 |
9 |
0.462 |
0.419 |
14 |
0.509 |
0.480 |
| 1" |
1.0000 |
8 |
0.606 |
0.551 |
12 |
0.663 |
0.625 |
| 1-1/8" |
1.1250 |
7 |
0.763 |
0.693 |
12 |
0.856 |
0.812 |
| 1-1/4" |
1.2500 |
7 |
0.969 |
0.890 |
12 |
1.073 |
1.024 |
| 1-3/8" |
1.3750 |
6 |
1.155 |
1.054 |
12 |
1.315 |
1.260 |
| 1-1/2" |
1.5000 |
6 |
1.405 |
1.294 |
12 |
1.581 |
1.521 |
| 1-3/4" |
1.7500 |
5 |
1.90 |
1.74 |
--- |
--- |
--- |
| 2" |
2.0000 |
4.5 |
2.50 |
2.30 |
--- |
--- |
--- |
The following table of clearance holes was adapted from ASME B18.2.8. The minimum hole
diameters are given.
| Bolt Size |
Bolt Dia. [in] |
Normal Fit [in] |
Close Fit [in] |
Loose Fit [in] |
| #0 |
0.0600 |
0.076 |
0.067 |
0.094 |
| #2 |
0.0860 |
0.102 |
0.094 |
0.116 |
| #4 |
0.1120 |
0.128 |
0.120 |
0.144 |
| #5 |
0.1250 |
0.156 |
0.141 |
0.172 |
| #6 |
0.1380 |
0.170 |
0.154 |
0.185 |
| #8 |
0.1640 |
0.196 |
0.180 |
0.213 |
| #10 |
0.1900 |
0.221 |
0.206 |
0.238 |
| 1/4" |
0.2500 |
0.281 |
0.266 |
0.297 |
| 5/16" |
0.3125 |
0.344 |
0.328 |
0.359 |
| 3/8" |
0.3750 |
0.406 |
0.391 |
0.422 |
| 7/16" |
0.4375 |
0.469 |
0.453 |
0.484 |
| 1/2" |
0.5000 |
0.562 |
0.531 |
0.609 |
| 5/8" |
0.6250 |
0.688 |
0.656 |
0.734 |
| 3/4" |
0.7500 |
0.812 |
0.781 |
0.906 |
| 7/8" |
0.8750 |
0.938 |
0.906 |
1.031 |
| 1" |
1.0000 |
1.094 |
1.031 |
1.156 |
| 1-1/8" |
1.1250 |
1.219 |
1.156 |
1.312 |
| 1-1/4" |
1.2500 |
1.344 |
1.281 |
1.438 |
| 1-3/8" |
1.3750 |
1.500 |
1.438 |
1.609 |
| 1-1/2" |
1.5000 |
1.625 |
1.562 |
1.734 |
Hastelloy C276 Hex Nut Dimensions
The following table of hex nut dimensions was adapted from ASME B18.2.2, Table 1-1,
"Dimensions of Square and Hex Machine Screw Nuts." This table is used for smaller size
hardware.
| Size |
Nominal (Major)
Diameter [in] |
Width Across Flats |
Thickness |
| Nominal [in] |
Minimum [in] |
Minimum [in] |
Maximum [in] |
| #0 |
0.060 |
5/32"(0.156) |
0.150 |
0.043 |
0.050 |
| #2 |
0.086 |
3/16"(0.188) |
0.180 |
0.057 |
0.066 |
| #4 |
0.112 |
1/4"(0.250) |
0.241 |
0.087 |
0.098 |
| #6 |
0.138 |
5/16"(0.312) |
0.302 |
0.102 |
0.114 |
| #8 |
0.164 |
11/32"(0.344) |
0.332 |
0.117 |
0.130 |
| #10 |
0.190 |
3/8"(0.375) |
0.362 |
0.117 |
0.130 |
| 1/4" |
0.250 |
7/16"(0.438) |
0.423 |
0.178 |
0.193 |
| 5/16" |
0.312 |
9/16"(0.562) |
0.545 |
0.208 |
0.225 |
| 3/8" |
0.375 |
5/8"(0.625) |
0.607 |
0.239 |
0.257 |
The following table of hex nut dimensions was adapted from ASME B18.2.2, Table 4,
"Dimensions of Hex Nuts and Hex Jam Nuts."
| Size |
Nominal (Major)
Diameter [in] |
Width Across Flats |
Thickness |
| Minimum [in] |
Maximum [in] |
Minimum [in] |
Maximum [in] |
| 1/4" |
0.2500 |
0.428 |
0.438 |
0.212 |
0.226 |
| 5/16" |
0.3125 |
0.489 |
0.500 |
0.258 |
0.273 |
| 3/8" |
0.3750 |
0.551 |
0.563 |
0.320 |
0.337 |
| 7/16" |
0.4375 |
0.675 |
0.688 |
0.365 |
0.385 |
| 1/2" |
0.5000 |
0.736 |
0.750 |
0.427 |
0.448 |
| 9/16" |
0.5625 |
0.861 |
0.875 |
0.473 |
0.496 |
| 5/8" |
0.6250 |
0.922 |
0.938 |
0.535 |
0.559 |
| 3/4" |
0.7500 |
1.088 |
1.125 |
0.617 |
0.665 |
| 7/8" |
0.8750 |
1.269 |
1.312 |
0.724 |
0.776 |
| 1" |
1.0000 |
1.450 |
1.500 |
0.831 |
0.887 |
| 1-1/8" |
1.1250 |
1.631 |
1.688 |
0.939 |
0.999 |
| 1-1/4" |
1.2500 |
1.812 |
1.875 |
1.030 |
1.094 |
| 1-3/8" |
1.3750 |
1.994 |
2.062 |
1.138 |
1.206 |
| 1-1/2" |
1.5000 |
2.175 |
2.250 |
1.245 |
1.317 |
| 1-5/8" |
1.6250 |
2.350 |
2.430 |
1.364 |
1.416 |
| 1-3/4" |
1.7500 |
2.538 |
2.625 |
1.460 |
1.540 |
| 1-7/8" |
1.8750 |
2.722 |
2.813 |
1.567 |
1.651 |
| 2" |
2.0000 |
2.900 |
3.000 |
1.675 |
1.763 |
Hastelloy C276 Flat Washer Dimensions
The following table of flat washer dimensions was adapted from ASME B18.21.1, Table 11
for Type A Plain Washers. Type A washers come in 2 series: Narrow and Wide.
| Size |
Basic Dia. [in] |
Series |
Inner Dia,
Basic [in] |
Outer Dia,
Basic [in] |
Thickness,
Basic [in] |
| #0 |
0.0600 |
--- |
0.078 |
0.188 |
0.020 |
| #2 |
0.0860 |
--- |
0.094 |
0.250 |
0.020 |
| #4 |
0.1120 |
--- |
0.125 |
0.312 |
0.032 |
| #6 |
0.1380 |
--- |
0.156 |
0.375 |
0.049 |
| #8 |
0.1640 |
--- |
0.188 |
0.438 |
0.049 |
| #10 |
0.1900 |
--- |
0.219 |
0.500 |
0.049 |
| 1/4" |
0.2500 |
Narrow |
0.281 |
0.625 |
0.065 |
| 1/4" |
0.2500 |
Wide |
0.312 |
0.734 |
0.065 |
| 5/16" |
0.3125 |
Narrow |
0.344 |
0.688 |
0.065 |
| 5/16" |
0.3125 |
Wide |
0.375 |
0.875 |
0.083 |
| 3/8" |
0.3750 |
Narrow |
0.406 |
0.812 |
0.065 |
| 3/8" |
0.3750 |
Wide |
0.438 |
1.000 |
0.083 |
| 7/16" |
0.4375 |
Narrow |
0.469 |
0.922 |
0.065 |
| 7/16" |
0.4375 |
Wide |
0.500 |
1.250 |
0.083 |
| 1/2" |
0.5000 |
Narrow |
0.531 |
1.062 |
0.095 |
| 1/2" |
0.5000 |
Wide |
0.562 |
1.375 |
0.109 |
| 9/16" |
0.5625 |
Narrow |
0.594 |
1.156 |
0.095 |
| 9/16" |
0.5625 |
Wide |
0.625 |
1.469 |
0.109 |
| 5/8" |
0.6250 |
Narrow |
0.656 |
1.312 |
0.095 |
| 5/8" |
0.6250 |
Wide |
0.688 |
1.750 |
0.134 |
| 3/4" |
0.7500 |
Narrow |
0.812 |
1.469 |
0.134 |
| 3/4" |
0.7500 |
Wide |
0.812 |
2.000 |
0.148 |
| 7/8" |
0.8750 |
Narrow |
0.938 |
1.750 |
0.134 |
| 7/8" |
0.8750 |
Wide |
0.938 |
2.250 |
0.165 |
| 1" |
1.0000 |
Narrow |
1.062 |
2.000 |
0.134 |
| 1" |
1.0000 |
Wide |
1.062 |
2.500 |
0.165 |
| 1-1/8" |
1.1250 |
Narrow |
1.250 |
2.250 |
0.134 |
| 1-1/8" |
1.1250 |
Wide |
1.250 |
2.750 |
0.165 |
| 1-1/4" |
1.2500 |
Narrow |
1.375 |
2.500 |
0.165 |
| 1-1/4" |
1.2500 |
Wide |
1.375 |
3.000 |
0.165 |
| 1-3/8" |
1.3750 |
Narrow |
1.500 |
2.750 |
0.165 |
| 1-3/8" |
1.3750 |
Wide |
1.500 |
3.250 |
0.180 |
| 1-1/2" |
1.5000 |
Narrow |
1.625 |
3.000 |
0.165 |
| 1-1/2" |
1.5000 |
Wide |
1.625 |
3.500 |
0.180 |
| 1-5/8" |
1.6250 |
--- |
1.750 |
3.750 |
0.180 |
| 1-3/4" |
1.7500 |
--- |
1.875 |
4.000 |
0.180 |
| 1-7/8" |
1.8750 |
--- |
2.000 |
4.250 |
0.180 |
| 2" |
2.0000 |
--- |
2.125 |
4.500 |
0.180 |
Ask Free Sample of Hastelloy C276 Fastener, Bolts, Nuts, Washer. Please Call +91 9664408767
Widest Range of Hastelloy C276 Fastener in Mumbai,
India.
- Alloy C276 Fastener Supplier in India
- Hastelloy C276 Fastener Supplier in India
- Hastelloy C276 Fastener Bolt
- Hastelloy® Alloy C276 12mm Anchor Fastener Price
- Alloy C276 10mm Anchor Fastener Price
- Hastelloy C276 Fastener Suppliers in Mumbai
- Hastelloy C276 Screw Suppliers
- Hastelloy Alloy C276 Fastener Manufacturers
- Nickel Alloy C276 Concrete Screws
- Alloy C276 Washer Manufacturers In India
- Hastelloy C276 Machine Bolts
- Hastelloy C276 Price in India
- Hastelloy Alloy C276 Lock Washers
- UNS N10276 Fasteners
- Alloy C276 Fastener Supplier
- Price of Hastelloy C276 Belleville Washer
- UNS N10276 Fasteners
- Hastelloy C276 Anchor Bolt Weight Calculator In MM
- Hastelloy C276 Fasteners Manufacturer in Mumbai
- Hastelloy Alloy C276 Set Screw
- Nickel Alloy C276 Fastener Suppliers in Mumbai
- Hastelloy C276 Flat Washers Exporter
- Hastelloy C276 Fasteners Weight Calculator
- 2.4819 Fender Washer
- Hastelloy Alloy C276 Bolts and Nuts
- Hastelloy C276 Self Tapping Screws
- Hastelloy C276 Fastener Price in India
- 2.4819 Square Bolts Stockists
- Hastelloy Alloy C276 Socket Screws
- Hastelloy C276 Square Nut
- ASTM B574 Hastelloy C276 Fastener
- Hastelloy Alloy C276 Ogee Washers
- Hastelloy C276 Fastener Supplier in India
- Alloy C276 Wing Nuts Sizes
- Hastelloy C276 Hex Nut Dimensions
- Hastelloy® Alloy C276 Bolt Specification
- Hastelloy Alloy C276 Hex Head Bolts
- Hastelloy 2.4819 Fastener Exporter
- Nickel Alloy C276 Stud Price
- Alloy C276 Socket Cap Screw Stock
- Hastelloy C276 Fastener Price Per Kg in Mumbai
- Hastelloy C276 Spring Washers
- Hastelloy C276 Coupling Nuts
- Hastelloy® Alloy C276 Lock Nut
- ASME SB574 Hastelloy C276 Fastener
- Alloy C276 Split Washers Sizes
- Hastelloy C276 Flange Bolts
- Hastelloy C276 Panel Nuts
- Cost Of Hastelloy C276 Fastener
- Alloy C276 Dome Nut
- Alloy C276 Stud Bolt Price List
- Hastelloy C276 Heavy Hex Bolts
Tests of ASTM B574 Hastelloy C276 Fastener
Before being prepared for shipment to the customer, ASTM B574
Hastelloy C276 Fasteners Testing should be constructed in accordance with applicable
standards and thoroughly tested for potential flaws.
Finishes Of Hastelloy C276 Fastener
| Powder coating |
Zinc and yellow plated |
| Zinc and de-embrittled |
Stayblack finish |
| Sherardised |
Nickel |
| Green chromate |
Geomet |
| Galvanised |
Electro brass plated |
| Chrome |
Chemical black |
Hastelloy C276 Fasteners - Comparing International Standards
EU
EN |
USA
- |
Germany
DIN,WNr |
Japan
JIS |
France
AFNOR |
England
BS |
Italy
UNI |
China
GB |
Sweden
SS |
Poland
PN |
Czechia
CSN |
Finland
SFS |
Austria
ONORM |
Russia
GOST |
| NiMo16Cr15W |
C276 |
2.4819 |
NW 0276 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
ХН65МВУ |
best offer & competitive quotation
Hastelloy C276 Fasteners Supply in Below
Countries
| Products We Supplied |
Description |
Country |
| Hastelloy C276 Fasteners |
UNS N10276 U Bolts Supply |
Malaysia, Germany, Venezuela, Serbia |
| ASTM B574 Hastelloy C276 Fasteners |
2.4819 Nut Bolt Weight Chart In Kg |
Belarus, Azerbaijan, Oman, Gambia, South Africa |
| Hastelloy C276 Bolts and Nuts Price List |
N10276 Alloy Eye Bolts |
Romania, Yemen, Slovakia, Mongolia, Puerto Rico |
| Hastelloy Alloy C276 Fasteners Manufacturers |
2.4819 Hastelloy Double Ended Studs In India |
Hong Kong, Singapore, Switzerland, Australia |
| ASME SB574 Hastelloy C276 Fasteners In India |
N10276 Acorn Nuts Manufacturers In India |
Portugal, Taiwan, New Zealand, Belgium |
| Hastelloy GOST МНЖМц 28-2,5-1,5 Fastener |
Hastelloy C276 Nyloc Nuts Manufacturers In India |
Czech Republic, Nigeria, Jordan, Ecuador, Chile |
| Hastelloy C276 Bolt Torque Chart |
UNS N10276 Carriage Bolts Near Me |
Nepal, Bulgaria, Kuwait, Bhutan |
| Hastelloy® Alloy C276 Spring Washer |
Hastelloy C276 Flat Washers |
Vietnam, Hungary, Estonia, Denmark |
Common Application for Alloy C276 Fasteners
Heavy Equipment
Automotive
Chemical
Power Generation
Shipbuilding
Construction
Aerospace
Oil & Gas
