A typical material for the chemical industry as well as the automobile engine, aero engine, and airframe sectors, Inconel 600 is a mix of Nickel Chromium and Iron. In order to reduce the risk of stress corrosion cracking caused by high-purity water containing chloride ions, controlled chemical composition limitations are used in the nuclear industry.
As a non-magnetic alloy, Alloy 600 has excellent mechanical properties, is strong and workable, and can be welded easily. Chrome-nickel stainless steels are often formulated using Inconel Alloy 600 because of their cold-forming properties. As well as resistance to nitrogen and airborne carburizing gases, the alloy also withstands ammonia-bearing environments. Components including control rod inlet stub tubes, reactor containment parts, seals, steaming dryers, and d separators in hot water boilers are used in nuclear reactors.
| EU EN |
USA - |
Germany DIN,WNr |
Japan JIS |
France AFNOR |
England BS |
UNS | Russia GOST |
| EN 10095 (2.4816) | 600 | 2.4816 | NCF 600 | NC15FE11M | NA 14 | N06600 | МНЖМц 28-2,5-1,5 |
If you are looking for best prices for Inconel 600, Inconel 600 Material email us on info@duplexsteelalloys.com or call us on +91 9664408767
| Sheet / Plate | Pipe | Buttweld Fittings | Flanges | Forged Fittings | Fasteners | Bars |
| ASTM B168 | ASTM B167, B517 | ASTM B366 | ASTM B564 | ASTM B564 | ASTM B166 | ASTM B166 |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| Physical Properties | Metric | English | |
| Inconel Alloy 600 | Density | 8.47 g/cc | 0.306 lb/in³ |
Request a Quote for the Inconel 600 you need. Contact Duplex Steel & Alloys to place your order or for more information.
