In India, Duplex Steel & Alloys manufactures and
supplies Inconel
718 bars. Our Inconel 718 Bars are accessible to our
important and valuable consumers in a variety of diameters, inner diameter,
and sizes, as well as in bespoke form and at very competitive pricing. Ni is
50-55 percent, Cr is 17-21 percent, Nb is 4.75-5.5 percent, and tantalum is
4.75-5.5 percent, with relatively low concentrations of Mo, Ti, Co, Al, Mn,
Cu, Si, and other elements.
Up to 1300°F (704°C), 718 compounds exhibit admirable
strength and ductility. This alloy may be soldered without stiffening or
shattering due to its modest chip formation response. Inconel Alloy 718 has
no ferromagnetism. It has good corrosion and erosion resistance and is
suggested for parts that require high creep and strain rupture stability at
temperatures up to 1300 degrees F (704°C) and chemical stability at
temperatures up to 1800 degrees F (982°C). The metal is heated and then
progressively cooled. The material's strength and stress resistance are
derived from this.
Alloy 718 Rod, Inconel® Alloy 718 Round Bar, Inconel 718 Rod, Nickel Alloy
718 Bar, Inconel 718 Round Bar, Inconel Alloy 718 Bar, Inconel 718 Bar
Suppliers in Mumbai, India.
Inconel Alloy 718 Round Bar, Inconel 718 Square Bar, Inconel 718 Rod Price, Inconel 718
Flat Bar, Inconel 718 Hex Bar, JIS NCF 718 Bar, Inconel 718 Bar Manufacturers in India.
Inconel 718 bars are
characterised by a strong longitudinal and impact strength, as well as their superb
process ability. Inconel 718 round bar may also be utilized in a wide variety of
temperatures since it can endure the harsh demands of extreme cold and heat.
Casings, bolts, fasteners, rings, and instrumentation components are
all suitable candidates for hot extrusion tooling and parts. Inconel 718 bar is also
commonly used in the manufacture of aeronautical, automotive, and other components,
including but not limited to:
• Parts of rockets
• Ingredients of nuclear fuel
• Holding tanks for cryo chemicals
• Turbines
• Parts for down-hole shafting
• Parts of the well head
• Forgings
• Rings, rounds, squares, and rectangular flats are available as bar materials.
Inconel 718 Round Bar Specifications
| Specifications |
ASTM B637 / ASME SB637 |
| Dimension Standard |
EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Bar Diameter |
3 ~ 800mm |
| Hex Bar size |
2-100mm A/F |
| Flat bar size |
Thickness: 2 -100mm.
Width: 10 to 500mm. |
| Square bar size |
4 to 100mm |
| Rectangular Bars |
Size: 33 x 30mm to 295 x 1066mm.
Thickness: 3.0 to 12.0mm. |
| Hollow Bars |
32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size |
1/2 to 495mm Diameter |
| Finish |
Cold (bright) drawn, centreless ground, hot rolled, smooth turned,
peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright,
Polish, Grinding, Centreless Ground & Black |
| Tolerance |
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients
requirements |
| Bar Surface |
Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished,
Polished, Hairline |
| Rolled Bars Condition |
Hardened & tempered, annealed |
| Cold Rolled Bar Technique |
Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Form |
Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square,
Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F),
Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
|
Types of Inconel 718 Bars
Inconel 718 Hot Rolled Bar
Inconel 718 Cold Rolled Bar
Alloy 718 Round Bar
Alloy 718 Square Bar
Inconel 718 Flat Bar
Nickel Alloy 718 Hexagon Bar
ASTM B637 Inconel 718 Rectangular Bar
Inconel Alloy 718 Forged Bar
UNS N07718 Bright Bar
Inconel 718 Threaded Rod
Inconel 718 Black Bar
Alloy 718 Hollow Bar
Inconel Alloy 718 Round Bar Equivalent Material
| STANDARD |
WERKSTOFF NR. |
UNS |
| Inconel 718 |
2.4668 |
N07718 |
Inconel 718 Round Bar Chemical Composition
| Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
| Inconel 718 |
0.08 max |
0.35 max |
0.35 max |
0.015 max |
0.30 max |
– |
50.00 – 55.00 |
17.00 – 21.00 |
Inconel 718 Round Bar Mechanical Properties
| Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| Inconel 718 |
8.2 g/cm3 |
1350 °C (2460 °F) |
Psi – 1,35,000 , MPa – 930 |
Psi – 75,000 , MPa – 482 |
45 % |
Inconel 718 Rod Rate, Alloy 718 Bar, Inconel® Alloy 718 Bar, ASTM B637 Inconel 718 Bar,
Inconel Alloy 718 Rod, Inconel 718 Rods Suppliers in Mumbai.
If you are looking for best prices for Inconel 718 Bars, Inconel 718 Rod, Inconel
718 Flat Bar email us on info@duplexsteelalloys.com
or call us on +91 9664408767
Inconel 718 Bar Price List
| Product |
Price |
| Inconel 718 Round Bar Price |
US $999-2500 / Ton |
| Inconel 718 Bar Price |
US $1990-3900 / Ton |
| Inconel 718 Square Bar Price |
US $800-2100 / Ton |
| Alloy 718 Round Bar Price in India |
S $1000.0-3000.0 / Ton |
| Inconel Alloy 718 Hex Bar Price |
US $300-2700 / Ton |
| Inconel Alloy 718 Rod Rate |
US $1000-2500 / Ton |
| Alloy 718 Triangle Bar Price |
US $1500-2600 / Ton |
| 718 Inconel Alloy Rectangular Bar Prices |
US $2200-4000 / Ton |
| Inconel 718 Bright Bar Price List |
US $1.2-4.7 / Kilogram |
| Inconel 718 Rod Price Per KG in India |
US $1,600.00-2,200.00 / Ton |
Inconel 718 Rod Standard Sizes
| Type |
Sizes in milimeter |
Sizes in inches |
Tolerance |
| Peeled and Polished |
40.00 - 150.00 |
1.50 - 6.00 |
h11, h11-DIN 1013 |
| Cold Drawn and Polish |
3.00 to 75.00 |
1/8 to3.00 |
h8 to h11 |
| Cold Drawn and Ground |
10.00 to 75.00 |
5/6 to 2.50 |
h8 to h11 |
| Peeled nd Ground |
20.00 - 50.00 |
3/4 - 2.00 |
h9 to h11 |
Inconel 718 Round Bars Standard lengths of 2000 mm up to 6000 mm.
| 5.0 |
45.0 |
| 6.0 |
50.0 |
| 7.0 |
55.0 |
| 8.0 |
60.0 |
| 9.0 |
65.0 |
| 10.0 |
70.0 |
| 12.0 |
75.0 |
| 16.0 |
80.0 |
| 20.0 |
90.0 |
| 25.0 |
100.0 |
| 30.0 |
130.0 |
| 35.0 |
160.0 |
| 40.0 |
200.0 |
Inconel 718 Round Bar Weight Chart
| Diameter |
Weight Chart |
Dia |
Weight Chart |
| (mm) |
per metre (kg) |
(in) |
per metre (kg) |
| 3mm |
0.06 |
1/8" |
0.06 |
| 4mm |
0.10 |
3/16" |
0.14 |
| 5mm |
0.16 |
1/4" |
0.25 |
| 6mm |
0.22 |
5/16" |
0.39 |
| 7mm |
0.30 |
3/8" |
0.56 |
| 8mm |
0.40 |
7/16" |
0.77 |
| 10mm |
0.62 |
1/2" |
1.00 |
| 12mm |
0.89 |
9/16" |
1.22 |
| 14mm |
1.22 |
5/8" |
1.56 |
| 15mm |
1.40 |
11/16" |
1.89 |
| 16mm |
1.59 |
3/4" |
2.25 |
| 18mm |
2.01 |
7/8" |
3.07 |
| 20mm |
2.48 |
1" |
4.03 |
| 22mm |
3.00 |
|
|
| 24mm |
3.57 |
|
|
| 25mm |
3.88 |
|
Inconel 718 Bar Dimensions
Diameter or
Width
(mm) |
Weight per meter |
Sectional Area |
Perimeter |
Square
(kg) |
Round
(kg) |
Square
(cm²) |
Round
(cm²) |
Square
(cm) |
Round
(cm) |
| 5.0 |
0.20 |
0.15 |
0.25 |
0.20 |
2.0 |
1.57 |
| 5.5 |
0.24 |
0.19 |
0.30 |
0.24 |
2.2 |
1.78 |
| 6.0 |
0.28 |
0.22 |
0.36 |
0.28 |
2.4 |
1.88 |
| 7.0 |
0.38 |
0.30 |
0.49 |
0.38 |
2.8 |
2.20 |
| 8.0 |
0.50 |
0.39 |
0.64 |
0.50 |
3.2 |
2.51 |
| 9.0 |
0.64 |
0.50 |
0.81 |
0.64 |
3.6 |
2.83 |
| 10 |
0.73 |
0.63 |
1.00 |
0.79 |
4.0 |
3.14 |
| 11 |
0.95 |
0.75 |
1.21 |
0.95 |
4.4 |
3.46 |
| 12 |
1.13 |
0.89 |
1.44 |
1.13 |
4.8 |
3.77 |
| 14 |
1.54 |
1.21 |
1.96 |
1.54 |
5.6 |
4.40 |
| 16 |
2.01 |
1.58 |
2.56 |
2.01 |
6.4 |
5.03 |
| 18 |
2.54 |
2.00 |
3.24 |
2.54 |
7.2 |
5.65 |
| 20 |
3.14 |
2.47 |
4.00 |
3.14 |
8.0 |
6.28 |
| 22 |
3.80 |
2.98 |
4.84 |
3.80 |
8.8 |
6.91 |
| 25 |
4.91 |
3.85 |
6.25 |
4.91 |
10.0 |
7.85 |
| 28 |
6.15 |
4.83 |
7.84 |
6.16 |
11.2 |
8.80 |
| 32 |
8.04 |
6.31 |
10.24 |
8.04 |
12.8 |
10.05 |
| 36 |
10.17 |
7.99 |
12.96 |
10.18 |
14.4 |
11.31 |
| 40 |
12.56 |
9.86 |
16.00 |
12.57 |
16.0 |
12.57 |
| 45 |
15.90 |
12.49 |
20.25 |
15.90 |
18.0 |
14.14 |
| 50 |
19.62 |
15.41 |
25.00 |
19.64 |
20.0 |
15.71 |
| 56 |
24.62 |
19.34 |
31.36 |
24.63 |
22.4 |
17.59 |
| 63 |
31.16 |
24.47 |
36.69 |
31.17 |
25.2 |
19.79 |
| 71 |
39.57 |
31.08 |
50.41 |
39.59 |
28.4 |
22.31 |
| 80 |
50.24 |
39.46 |
64.00 |
50.27 |
32.0 |
25.13 |
Ask Free Sample of Inconel 718 Bar, Rods, Round Bar Please Call +91 9664408767
Widest Range of Inconel 718 Bar in Mumbai, India.
- Price of Inconel 718 Rod
- Alloy 718 Rod Price List in India
- 8mm Inconel 718 Rod
- Inconel 718 Bar Manufacturers in Mumbai
- Inconel 718 Rods Price in India
- 718 Inconel Rod Manufacturers in India
- Inconel 718 Rod Standard Sizes
- UNS N07718 Bars
- Nickel Alloy 718 Rod Supplier
- Inconel Alloy 718 Bar Manufacturer in Mumbai
- 8mm Square Inconel 718 Bar
- Inconel Alloy 718 Bar Supplier in India
- Inconel Alloy 718 Rod Supplier in India
- 718 12mm Inconel Rod
- Alloy 718 Bar Suppliers in Mumbai
- Inconel® Alloy 718 Round Bar Weight Calculator
- Inconel 718 Bar Exporter
- Inconel Alloy 718 Round Bar Suppliers
- ASTM B637 Inconel 718 Round Bar
- Inconel 718 Bar Suppliers in Mumbai
- 2.4668 Round Rods
- 718 Inconel Bar Manufacturers
- 718 Inconel Bar Price
- Alloy 718 Rod Weight Chart
- 718 Inconel Round Bar Tolerances
- Inconel 718 Rod Price Per Kg in Mumbai
- Inconel Alloy 718 Bar Stock
- ASTM B637 Inconel 718 Bar
- ASTM B637 alloy 718 Hex Bar
- Inconel Bar 718
- Standard Alloy 718 Round Bar Sizes in mm
- Nickel Alloy 718 Flat Bar
- 718 Inconel Flat Bar Stock
- Inconel 718 Rod Supplier in India
- Inconel Alloy 718 Flat Bar
- 2.4668 HR Rod Exporter
- Alloy 718 Round Bar Sizes
- Cost Of 718 Inconel Rod
- Alloy 718 Round Bar HSN Code
- JIS NCF 718 Cold Rolled Rod
- 718 Inconel Bar Price Per Kg
- Inconel® Alloy 718 Hot Rolled Bars
- Inconel 718 Bar Price in India
- Alloy 718 Round Bar Weight
- Inconel 718 Rod Size Chart
- ASME SB637 Inconel 718 Rod
- Inconel 718 Bar Price India
- Inconel 718 Rod Price Per Kg in India
- 2.4668 HR Bar Stockists
- Nickel Alloy 718 Inconel Bar Stock
Tests of ASTM B637 Inconel 718 Bar
Before being prepared for shipment to the customer, ASTM B637
Inconel 718 Bars Testing should be constructed in accordance with applicable standards
and thoroughly tested for potential flaws.
Brinell/Rockwell Hardness Test
Finishes Of Inconel 718 Bar
| CD |
Cold drawn |
P |
Polished |
| CG |
Centreless ground |
HF |
Hot finished |
| BD |
Bright drawn |
SRE |
Slit rolled edge |
| P&T |
Peeled and turned |
RT |
Rough turned/peeled |
| CF |
Cold finished |
HRAP |
Hot rolled annealed and pickled |
| ST |
Smooth turned |
PR |
Peeled and reeled |
Inconel 718 Bar - Comparing International Standards
EU
EN |
USA
- |
Germany
DIN,WNr |
Japan
JIS |
France
AFNOR |
England
BS |
Italy
UNI |
China
GB |
Sweden
SS |
Poland
PN |
Czechia
CSN |
Finland
SFS |
Austria
ONORM |
Russia
GOST |
| EN 10095 (2.4668) |
718 |
2.4668 |
NCF 718 |
NC22DNB4M |
NA 21 |
- |
- |
- |
- |
- |
- |
- |
ХН75МБТЮ |
best offer & competitive quotation
Inconel 718 Rods Supply in Below Countries
| Products We Supplied |
Description |
Country |
| ASTM B637 Nickel Alloy 718 Rods |
Inconel 718 3mm to 50mm Rods |
Oman, Azerbaijan, Gambia, Belarus, South Africa |
| ASME SB637 Inconel 718 Bars |
2.4668 Cold Rolled Bars |
Taiwan, Belgium, New Zealand, Portugal |
| 718 Inconel Polished Bars |
Polished UNS N07718 Bars |
Bulgaria, Kuwait, Nepal, Bhutan |
| Inconel Alloy 718 Hex Bar Sizes in MM |
JIS NCF 718 Hexagonal Bar |
Mongolia, Yemen, Romania, Puerto Rico, Slovakia |
| Inconel 718 Round Bars |
UNS N07718 Hot Rolled Rods Supply |
Malaysia, Venezuela, Germany, Serbia |
| 718 Inconel Square Bar Weight |
8mm Inconel 718 Square Sar |
Vietnam, Denmark, Estonia, Hungary |
Inconel 718 Rectangular Bar |
718 Inconel Cold Drawn Rectangular Bar |
Switzerland, Singapore, Hong Kong, Australia |
| Inconel Alloy 718 Rectangular Bars |
3.0 to 12.0mm Thickness Inconel 718 Rectangular Bar |
Chile, Czech Republic, Jordan, Nigeria, Ecuador |
Common Application for 718 Inconel Rods
Power Generation
Construction
Shipbuilding
Aerospace
Heavy Equipment
Automotive
Chemical
Oil & Gas
